Digital Storage Oscilloscopes (VPL-3000 Series)

In this oscilloscope we used good qulaity product. Once you have to try it.

SKU: VPL-3000 Series Categories: Test & Measurement, DSO

Specifications

CHARACTERISTICS:

The highest Single real-time sampling rate can be up to 500MHzsa/s; Equivalent sampling rate is up to10GSa/s.
Memory Depth: 4K/CH
Trigger types: Edge, Pulse Width, Video, Slope, Alternative
Unique Digital Filter function and Waveform recorder function
Support Pass/Fail function.
Thirty two parameters Auto measure function.
Save/recall types: Setups, Waveforms, Csv file, Picture.
Support Multilingual On-line help system
Waveform Intensity and Grid Brightness can be adjusted.
Support twelve types Language
Standard Configuration Port:
*USB Host: Support USB flash driver save/recall function and update firmware;
*USB Device: Support PictBridge compatible printer and support PC remote control;
*RS232: Pass/Fail Output.

Input

Input Coupling : AC, DC, GND
Input Impedance : DC: 1MW+/-2% || 17pF +/-3pF AC: 1.2MW+/-2% || 17pF +/-3pF, <=100mV/div 1.0M.+/-2% || 17pF /-3pF, >100mV/div
Maximum Input Voltage : ±400V PK-PK CATI
Ch to Ch Isolation : >100: 1 at 10MHZ
(Both channels in same V/div setting)
Probe attenuator : 1X, 10X
Probe attenuator : 1X, 10X, 100X, 1000X
Trigger Level Accuracy :Internal: ±(0.2 div×V/div)
(typical) applicable for the ( within±4divisions from center of screen)
signal of rising and falling EXT: ±(6% of setting + 40 mV) EXT/5: ±(6% of setting + 200 mV)
time >20ns
Edge Trigger : Edge type: Rising, Falling, Rising and Falling
Pulse Width Trigger : Trigger Modes: ( > , < , = ) Positive Pulse Width, (>,:<,=) Negative Pulse Width
Pulse Width Range : 20ns-10s
Video Trigger : Support signal Formats: PAL/ SECAM, NTSC
:Trigger condition: odd field, even field, all lines, line Num
Slope Trigger : ( > , < , = ) Positive slope, ( > , < , = ) Negative slope
:Time: 20ns-10s
Alternative Trigger : CH1 trigger type: Edge, Pulse, Video, Slope
:CH2 trigger type: Edge, Pulse, Video, Slope

Control Panel Function

Auto Set : Auto adjusting the Vertical, Horizontal system :andTrigger Position
w Save/Recall : Support 2 Group referenced Waveforms, 20 Group setups, 20 : Group captured Waveforms internal Storage/Recall : function and USB flash driver storage function.

Hard Ware Frequency Counter
Reading resolution : 6 Bytes
Accuracy : ±0.01%
Range : DC Couple, 10HZ to MAX Bandwidth
signal Types : Satisfying all Trigger signal (Except Pulse width trigger :and Video Trigger)

Auto Measure : Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg,Mean, Crms, Vrms, :ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall :time, Freq, Period, +Wid, – Wid, +Dut, -Dut, Bwid, Phase, FRR, :FRF, FFR, FFF, LRR, LRF, LFR, LFF
Cursor Measure : Manual mode, Track mode and Auto mode

Real Time Sampling Rate : 1CH: 500MHzS/s 2CH: 250MS/s
Equivalent Sampling Rate : 10GSa/s
Measure Display Modes : MAIN, WINDOW, WINDOW ZOOM, Scan, X-Y
Timebase Accuracy : ±100ppm measured over 10ms interval
Time Window : 12 Divisions
Horizontal Scan Range : 25ns/div -50s/div
:Scan: 100ms/div -50s/div (1- 2.5-5 sequence)

Vertical Sensitivity : 2mV-5V/div at input BNC(1-2-5 order)
Channel voltage offset range : 2mV-100mV:±2V 102mV-5V: ± 40V in Fixed Gain Ranges :and variable Gain Ranges
Vertical Resolution : 8 bit
Channels : 2
Analog Bandwidth : 25MHz (at inputBNC)
BW Flatness : DC-10% of rated BW: ±1DB 10%-50% of rated BW: :±2DB 50%-100% of rated BW: ±3DB
Lower frequency limit : <10Hz (at input BNC) (AC -3dB)
Noise: Pk-Pk for 3K record : <0.6Div for average of 10Pk-Pk readings in fixed gain :settings. <=0.7 Div for average of 10 Pk- Pk readings, Variable :gain settings
SFDR including harmonics : >40dB
DC Gain Accuracy : <±3.0%: 5mv/div to 5V/div in Fixed Gain :Ranges. <±4.0%:typical for 2mv/div and Variable Gain :Ranges
DC Measurement Accuracy : ± [3%X ( |reading|+|offset| ) +1% of |offset| +0.2div+2mv]
All Gain settings <100mv/div
DC Measurement Accuracy : ± [3%X ( |reading|+|offset| ) +1% of |offset| +0.2div+2mv]
:All Gain settings >100mv/div
Rise time, Typical : <14ns (using500ps pulse) Math operation : +,-, *, /,FFT
FFT : Window mode: Hanning, Hanmming, :Blackman, Rectangular Sampling points: 1024

Trigger Types : Edge, Pulse Width, Video, Slope, Alternative
Trigger Modes : Auto, Normal, Single
Trigger Sources : Ch1-2, EXT, EXT/5, AC Line
Trigger Coupling : AC, DC, LF rej, HF rej
Trigger Level Range : CH1, CH2: ±6divisions from center of screen EXT: ±1.2V EXT/5 :±6V

Generic Specification

Display System
Display Mode : Color TFT 5.7in. (145mm) diagonal Liquid Crystal Display
Resolution : 320 horizontal by 234 vertical pixels
Display Contrast 150 :1 (Typical state)
Display Color : 64K color
Backlight Intensity : 300nit (Typical state)
Wave display range : 8 x 12 div
Wave Display Mode : Point, Vector
Persist : Off, 1 sec, 2 sec, 5 sec, Infinite
Menu Display : 2 sec, 5 sec, 10 sec, 20 sec, Infinite Skin Succinct
Screen saver : 1min, 2min, 5min, 10min,15min, 30min, 1hour, 2hour, 5hour, off
Waveform interpolation : Sin(x)/x, Linear
Color model : Normal , Invert
Language : Simplified Chinese, Traditional Chinese, English, French, :German, Russian, Spanish, Portuguese Japanese, Korean, :Italian, Arabic

Power Supply

Mechanical

Environments

Temperature : Operating:10°C to +40°C Not operating: -20°C to +60°C
Humidity : Operating: 85%RH, 40°C, 24 hours Not operating: 85%RH, :65°C, 24 hours

Accessaries:

Note: Specifications can be changed, added or subtracted without notice in our constant efforts for improvement.