Sensor Trainer Kit (VPL-TT-STK)

The Sensor Trainer consists of the following sensors:

1. Proximity Sensor Inductive

The Proximity Sensor Inductive works when an iron metal comes in contact with the sensor.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

2. Proximity Sensor Capacitive

The Proximity Sensor Capacitive works when any object comes in contact with the sensor.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

3. Optical Sensor

The Optical Sensor works when any object is placed in between the Transmitter & Receiver of the sensor.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

4. Hall (Magnetic) Sensor

The Hall Sensor works when the magnet comes in contact with the sensor.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

5. Reed Switch Sensor

The Reed Switch Sensor works when the magnet comes in contact with the sensor.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

6. Solenoid Valve

The Solenoid Valve works when the input of the +24V or GND is given to the screw terminals of the module.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

7. Infra-Red Sensor

The Infra-red Sensor works when any solid object is placed in between the Transmitter & Receiver of the sensor.
User can observe the result of +24V or GND at the output of the screw terminals of the module.

8. Level Sensor

Level Sensor is an analog sensor which works when the float level moves from bottom to top position.
User can observe the result of the Analog output from 5V to 0V corresponding to float level from down to up position at the output of the screw terminals of the module.

9. Temperature Sensor

Temperature Sensor is an analog sensor which works when the RTD heats up.
User can observe the result of the Analog output from 0V to 1V corresponding to the temperature of 0 to 100°C at the output of the screw terminals of the module.

10. Pressure Sensor

Pressure Sensor is an analog sensor which works when the air pressure is given to the sensor.
User can observe the result of the Analog output from 1V to 5V corresponding to the pressure of 0 to 1MPa at the output of the screw terminals of the module.

Note: Specifications can be changed, added or subtracted without notice in our constant efforts for improvement.