1. Home
  2. Electronic & Communication Trainers
  3. Control Trainers
  4. Temperature System Simulator (VPL-CL-TSS)

Temperature System Simulator (VPL-CL-TSS)

DESCRIPTION

This set up is designed to study performance of analog PID controller with model process as temperature control system. The set up has built in signal source as reference, digital voltmeter as temperature indicator, PID controller with separate controls and a model process with built in regulated DC supply to operate the system.

SKU: VPL-CL-TSS Category:
  1. General Details

    The controller parameters are controlled by PID controls in which I control can be out of circuit by mean ‘I ON’ control switch. The D control is made out by mean of keeping D control to minimum or fully counter – clockwise direction. The set point temperature is adjusted by ‘SET POINT’ control while the reference temperature is read by digital display keeping TEMP switch to set point direction. The heater may be cut-off regardless of any setting by mean of ‘HEATER ON’ switch. A fan is included in the oven which is used to bring temperature below when the heater is off. The similar one is used to add disturbance when the set up is running under PID control mode.

    Note: Specifications of any product can be changed or added without notice in our constant efforts for improvement.

  2. TECHNICAL SPECIFICATIONS
    • Temperature controller with facilities for P,I,D and relay control blocks.
    • Operating temperature : Ambient to 90°C.
    • Separate control for P,I,D channel gains.
    • Two settings for relay thysteresis.
    • Fast 25W oven fitted with IC temperature sensor.
    • Digital display of set and measured temperature on a 3½ DVM.
    • Buffered output for recorder.
    • IC regulated power supplies.
    • 220V ±10%, 50Hz mains operated.
    • User’s Manual with patch cords.

    *Note: Specifications of any product can be changed or added without notice in our constant efforts for improvement.

  3. LIST OF EXPERIMENTS
    Following experiments can be performed:

    • Identification of Oven Parameter.
    • Study of P, PI PID control.
    • Study of ON/OFF control
  4. Related Products
    PID Controller Trainer (VPL-CL-PID)

    DESCRIPTION

    This set up is designed to study performance of analog PID Controller with simulated process. The board has built in signal source, building blocks for simulated process and PID Controller with built in regulated dc supply to operate the system.

    The PID Controller has three adjustable parameters, as P, I, D each has 10 turn potentiometers with dial knobs which are subdivided for .02 resolution. Three sockets are provided to add or out any of desired control P, I or D. at input of PID controller an adder is provided which sums the reference and feedback signals. The input and output of PID control has no phase shift.

    Details
    CL-STR
    Synchro Transmitter Receiver Trainer (VPL-CL-STR)

    DESCRIPTION

    A Synchro Transmitter Receiver (STR) Trainer is an electromagnetic transducer commonly used to convert an angular position of a shaft into an electric signal. It is usually called a synchro transmitter. Its construction is similar to that of a three phase alternator. It consists of Sator, Rotor, Synchro Transmitter and Synchro Receiver.

    Details