Wireless Embedded Training Kit (VPL-SNT-6)

SKU: VPL-SNT-6 Category: Advance/Wireless Communication Trainers

Wireless communication design, manufacture and integrate innovative, practical and easy to implement wireless solutions. In this technology, wireless sensor network are currently being employed in a variety of applications ranging from media to military and from home to industry. It is used to monitor physical or environmental conditions like temperature, pressure or motion to cooperatively pass their data through the nework to the main location.

Using the Wireless Sensor Network System, user can select any one of the three or more end devices (connected to the data acquisition module) from the coordinator (connected to the PC) wirelessly. And the sensor output are transmitted to the PC wirelessly.

Here we have designed the system based on IEEE 802.15.14 with a complete set of coordinators, End device, intelligent end device with real time sensors, signal conditioners etc.

The system consists of the following subcomponents:
1) Programmable Coordinator
2) Programmable Intelligent End Devices
3) Non Intelligent End Device with sensors
4) Humidity & Temperature sensor
5) Pressure Sensor
6) Soil Moisture Sensor

TECHNICAL SPECIFICATION

a. Programmable Coordinator & gateway ( at 2.4 Ghz range )

Zig Bee Coordinator : the coordinators designed around advance processors and must act as gateway with other
wireless connectivity etc.
Zigbee 2.4 Ghz with external antenna
Coordinator based on ARM 7 LPC2148
Supporting various Network Topology with RF data rate 250 kbps/80 kbps
On board relays with isolated Output & one Buzzer for alarm activation
On boards 20X4 LCD display for display for end device status
Data entry using 4X4 Hex Keypad digital Input
On Board USB Communication
Facility for switch selection for radio configuration, with / without processors
With configurable device software, for GUI based, along with testing utility, RF data rate 250 KBPS
On Board Power supply (5V, 3.3V)
With software selectable Data rate, with input / output range 100Ft /300Ft. for support of 2.4 Ghz.
With power supply 2.8V.

b. Programmable Intelligent End Devices

The end devices enclosed with plastic encl for filed applications
The Programmable Intelligent End Device with USB interface, with ARM LPC 2148 Processor etc.
Zigbee 2.4 Ghz Mhz with external antenna
Supporting various Network Topology with RF data rate 250 kbps/80 kbps
On board 6V relays with isolated Output & one Buzzer
On board 16X2 LCD display.
Can Connect with any digital Sensor* 05V or with analog sensors
On Board Power supply (5V, 3.3V)

c. Non Intelligent End Device with sensors

Zigbee 2.4 Ghz with external antenna.
On Board Configuration facility with USB
End Devices to connect with sensor* in range 0 to 3.3 V analog or digital
Board on Power supply (5V, 3.3V)
Field deployable ready to use
External Power for Zigbee
In Build features of Zigbee for 2.4 GHz:
Supporting various Network Topology with RF data rate 250 kbps

Note: Specifications can be changed, added or subtracted without notice in our constant efforts for improvement.